The F2A1X frequency to analog module converts the frequency input signal into a proportional analog voltage (0-5VDC) or current (4-20mA) output. The output signal is electrically isolated from the input signal and input power supply, effectively eliminating troublesome grounding loops. The input signal can be provided by a Monarch sensor (e.g. measuring RPM) or any digital signal source up to 12 volts. The F2A1X is factory pre-programmed with a full scale output and input scaling factor of your choice. These Settings can also be configured by the user using an optional USB programming cable and downloadable PM remote software. PM Remote software also displays data in real time and allows data to be recorded to your PC in.csv format. The F2A1X requires 12-24VDC power input.